How to Remove the Battery from a Samsung Phone

Luke Keith

Samsung Battery

Whether you’re addressing battery life issues or your phone is no longer holding a charge like it used to, knowing how to remove the battery from your Samsung phone is a valuable skill. For many Samsung Galaxy models, replacing the battery is a task you can perform at home with the right tools. Before starting, ensure you have a new compatible battery and the necessary tools for the job, such as a plastic pick, spudger, or opening tool to help pry open the phone case.

To ensure safety and avoid damage to your device, it’s crucial to turn off your Samsung phone and discharge the battery below 25% before attempting to remove it. This reduces the potential for a dangerous thermal event should the battery be accidentally damaged. Additionally, take care not to puncture or bend the battery, as this can lead to hazardous situations. Once the phone is opened, the battery can usually be found adhered to the phone’s interior. High-concentration isopropyl alcohol applied carefully can loosen the adhesive, facilitating safe battery removal.

Tools and Safety for Battery Removal

Before attempting to remove the battery from your Samsung phone, take these important considerations:

Tools

  • Small Phillips-head screwdriver: This will loosen tiny screws common in electronics.
  • Plastic pry tool: This helps separate parts of the phone without scratching the casing.
  • Heat source (optional): A hairdryer or heat gun can loosen adhesive.

Workspace Safety

  • Clean, well-lit workspace: A clear work area helps prevent losing small parts.
  • Anti-static measures: Wear an anti-static wrist strap to prevent static discharge, which can damage components.
  • Handling the battery: Do not bend or puncture the battery to avoid fire or chemical exposure.

Finding the Right Instructions

Removing a phone battery is model-specific. Since processes vary, search online for instructions specific to your Samsung phone model using this format, replacing [model number] with the actual number:

“How to remove battery Samsung [model number]”

Samsung S23 Battery

Look for resources like:

  • Manufacturer websites
  • Repair guides and tutorials
  • Videos on sites like YouTube

General Battery Removal Process (for guidance only)

Important: Use the correct procedure for your specific model, as these steps are just an overview.

  1. Turn off your phone: Completely power it down.
  2. Remove the back cover: If your phone has one, this usually involves prying it gently apart.
  3. Disconnect the battery: You might find a small connector to detach.
  4. Loosen adhesive (optional): If the battery is secured, apply gentle heat to weaken the glue.
  5. Carefully remove the battery: Use the plastic pry tool to gently lift it out. Avoid bending or force.

Battery Disposal: Do It Responsibly

Never throw batteries in the regular trash. Take them to:

  • Electronics stores: Many accept old batteries for recycling.
  • Recycling centers: Search online to locate one in your area.
  • Local hazardous waste programs: Your community might offer specific disposal options.

Key Takeaways

  • Removing a Samsung phone’s battery can address power issues.
  • It is important to turn off the device and discharge the battery for safety.
  • Use appropriate tools and methods to gently remove the battery.

Preparing for Battery Removal

Before you start, it’s crucial to have the right tools and know-how to safely remove your Samsung Galaxy phone’s battery. Taking the time to prepare can prevent damage to your phone.

Gathering Necessary Tools

To begin, assemble your tools. You’ll need a small Phillips screwdriver, a spudger, a suction handle, a plastic card, and possibly an iOpener to loosen the adhesive. Make sure you have a safe area to work with all your items on hand.

Powering Off the Device

Always power off the device to avoid short circuits. Hold down the power button until the device shuts down. Remove any SIM card and MicroSD card to prevent loss or damage during battery removal.

Opening the Back Cover

The back cover is often secured with clips and adhesive. If your model has a removable back, carefully pry it off. For models with a sealed back, gently heat the edges with an iOpener. This softens the adhesive. Once warm, use a suction cup and an opening pick to create a gap, then slide a plastic card in to cut through the seal. Be patient and work slowly to prevent damage to the phone or injury to yourself.

Removing and Replacing the Battery

When it’s time to replace the battery in a Samsung phone, one needs the right guidance to ensure the process is done safely and correctly. This section provides step-by-step instructions to disconnect and remove the old battery, install a new one, and complete the reassembly process while paying attention to safety procedures.

Disconnecting the Battery

To start, power off the device to avoid any electrical issues. Using a Phillips screwdriver, remove screws securing the backplate. Gently lift the backplate to access the internal components. The battery is usually connected to the motherboard with a cable. Carefully disconnect this cable to prevent damage to the phone.

Removing the Battery Safely

The battery may be held in place with adhesive. Warm it with a heat gun or hairdryer to soften the glue. Then, slowly lift the battery starting from the edge but avoid bending it, as this could cause a thermal event. If needed, use a bit of isopropyl alcohol to help loosen the adhesive.

Installing the New Battery

Once the old battery is out, clean any residue from the previous adhesive. Place new battery replacement adhesive on the phone. Align the new battery in the battery bay, ensuring the connection is secure and flush with the internal components. Gently press the battery into place.

Final Reassembly and Safety Checks

Reconnect the battery cable to the motherboard. Then, carefully reinstall the wireless charging coil and loudspeaker if they were moved or removed during disassembly. Return all screws to their corresponding places using the screwdriver. Before closing the phone, ensure all connections are secure and no tools are left inside. Snap the backplate back on and start the device to test the new battery.

Each step is crucial for the safe removal and installation of a Samsung phone’s battery. With the right tools and careful handling, one can replace a battery without causing harm to the device. Always recycle the old battery appropriately and check the device functions after reassembly to ensure everything is in working order.

Frequently Asked Questions

Removing a battery from a Samsung phone requires care. Here is a simple guide to common queries about battery removal from various Samsung models.

What are the steps for safely removing the battery from a Samsung Galaxy S10?

For a Galaxy S10, first turn off the phone. Then, using a SIM card eject tool or a pin, remove the SIM card tray. Gently heat the back cover to loosen adhesive and carefully pry it open with a plastic tool. Unscrew and remove the panel covering the battery connector. Disconnect it and take out the battery.

Can the battery be replaced in a Samsung Galaxy S20, and if so, how?

Yes, the battery in a Galaxy S20 can be replaced. Power down the device. Soften the glue with gentle heating around the edges and lift the back cover with a suction handle and pick. Remove the screws and panel over the battery connector, disconnect it, and replace the battery using adhesive strips.

What is the process to extract the battery from a Samsung Galaxy A51 without causing damage?

To extract the battery from a Galaxy A51, switch off the phone. Use a hairdryer or a heat gun to warm up the back cover’s edges, then lift it with a suction cup. Remove the back cover and unscrew the screws from the battery connector’s bracket. Detach the connector and lift the battery out.

Is it possible to remove the battery from a Samsung Galaxy S7, and what tools are required?

It is possible to remove the battery from a Galaxy S7. You will need a heat gun, suction cup, and plastic pick. After turning off the phone, apply heat and use the suction cup to create an opening. Insert the plastic pick and slide it around to release the back cover. Disconnect the battery and lift it out.

What precautions should be taken when taking out the battery of a Samsung Galaxy A12?

When removing a battery from a Galaxy A12, turn off the phone and use proper tools to avoid damaging the device. Do not puncture the battery or expose it to high temperatures. Make sure the battery is not overly charged or swollen before attempting removal.

How can the battery of a Samsung Galaxy A32 be removed correctly?

To remove the battery of a Galaxy A32, power it down first. Heat the back cover gently to loosen the adhesive. Use a suction cup to create a gap and a plastic pick to detach the back cover. Unscrew the bracket protecting the battery connector, disconnect it, and remove the battery cautiously.