Midea washing machines are reliable appliances. But sometimes they may need a reset to fix minor issues. A simple reset can often solve problems like error codes or unresponsive controls.
To reset a Midea washing machine, unplug it from the power source for 5 minutes, then plug it back in. This process clears the machine’s memory and resets its electronic controls. After plugging it back in, run a test cycle to check if the issue is resolved.
If a basic reset doesn’t work, check your model’s manual for specific reset instructions. Some Midea washers have a dedicated reset button or a special button sequence to perform a factory reset.
Troubleshooting Your Midea Washer: A Guide to Resetting
Is your Midea washing machine giving you trouble? Maybe it’s displaying an error code, not starting, or not draining properly. Before you call for service, try resetting your machine. It’s a simple troubleshooting step that often resolves common issues. Here’s how to do it.
Types of Resets
There are two main ways to reset your Midea washing machine:
- Power Reset: This is the most basic reset and involves unplugging the machine or turning off the circuit breaker.
- Control Panel Reset: Some Midea models have specific button combinations or procedures for resetting through the control panel.
Performing a Power Reset
A power reset can clear temporary glitches and refresh the machine’s electronics. Follow these steps:
- Unplug the machine: Disconnect the washing machine from the power outlet. Alternatively, you can turn off the circuit breaker that supplies power to the machine.
- Wait: Leave the machine unplugged for at least 5 minutes. This allows the electrical charge to dissipate and the machine’s memory to clear.
- Plug it back in: Reconnect the washing machine to the power outlet or turn the circuit breaker back on.
- Test the machine: Run a short wash cycle to see if the issue is resolved.
Performing a Control Panel Reset
Some Midea washing machines have a specific reset procedure using the control panel. Here’s a common method, but refer to your user manual for model-specific instructions:
- Turn on the machine: Press the power button to turn on the washing machine.
- Press and hold buttons: Press and hold a combination of buttons, such as “Start/Pause” and “Spin Speed,” for a few seconds. The exact buttons and duration may vary depending on your model.
- Wait for confirmation: The machine might beep or display a message to indicate a successful reset.
- Test the machine: Run a short wash cycle to check if the problem is solved.
Important Notes
Keep these points in mind when resetting your Midea washing machine:
- Consult your user manual: Always refer to your washing machine’s user manual for model-specific reset instructions.
- Safety first: Before performing any reset, ensure the machine is turned off and unplugged or the circuit breaker is turned off.
- Error codes: If your machine displays an error code, note it down before resetting. This can help you troubleshoot the issue further if the reset doesn’t resolve it.
| Reset Method | Description |
|---|---|
| Power Reset | Unplug the machine or turn off the circuit breaker for at least 5 minutes. |
| Control Panel Reset | Use a specific button combination on the control panel (refer to your user manual). |
Key Takeaways
- Unplug the Midea washer for 5 minutes to perform a basic reset
- Check the user manual for model-specific reset procedures
- Run a test cycle after resetting to ensure proper function
Preparation for Reset
Before resetting your Midea washing machine, you need to take some steps. These will help you do it safely and correctly.
Understanding Your Midea Model
Check your Midea washing machine’s user manual. It has key info about your model. Look for the model number. Common ones are MLV45N1B and MLV45N3B.
Find out your machine’s capacity. Many Midea washers have a 4.5 Cu Ft capacity. This affects how you use and reset it.
Note the power needs. Most Midea washers use a 120V, 60Hz electrical outlet. Make sure you have the right setup.
Check the water supply details. Your manual will tell you what’s needed. This is vital for proper function.
Safety Measures
Always unplug the washer before you start. This keeps you safe from shocks.
Wait 5 minutes after unplugging. This lets any stored power drain out.
Check for water leaks. If you see any, fix them before resetting.
Keep the area around the washer dry. This prevents slips and falls.
Make sure kids and pets are away from the machine. They could get hurt or mess up the reset.
Have a towel ready. You might need to clean up water spills.
Resetting Procedure
Resetting a Midea washing machine is a simple process. It can fix many common issues. Here’s how to do it safely and check if it worked.
Step-by-Step Reset Instructions
- Unplug the washing machine.
- Wait for 5 minutes.
- Plug it back in.
- Press the power button.
- Choose a cycle.
- Start the machine.
For some models you may need to:
- Hold down two buttons at once
- Press a special reset button
- Turn a dial to a certain spot
Check your user manual for exact steps. They can differ by model.
If these steps don’t work try a hard reset:
- Unplug the machine.
- Press the power button for 30 seconds.
- Plug it back in.
- Turn it on and test.
This drains leftover power and can fix tougher issues.
Post-Reset Verification
After resetting run a test cycle. Use an empty machine with no clothes or soap. Pick a short cycle and let it finish.
Watch for these signs of success:
- Machine turns on normally
- Buttons work as they should
- Water fills to the right level
- Drum spins without odd noises
- Cycle completes without stopping
If problems persist check for error codes. The display may show a code to help pinpoint the issue.
Some parts may need expert help. These include the lid lock drain pump and water level sensor. Call a pro if basic resets don’t work.
Frequently Asked Questions
Resetting a Midea washing machine can solve many common issues. Here are some key steps and tips for different models and scenarios.
What are the steps to reset a Midea top loader washing machine?
To reset a Midea top loader:
- Unplug the machine for 1 minute
- Plug it back in
- Open and close the lid 6 times within 12 seconds
- Press the start button
This process should reset the machine’s control board.
How can I perform a factory reset on my Midea front load washing machine?
For a Midea front loader factory reset:
- Turn off the machine
- Press and hold the “Temp” and “Spin” buttons
- Turn the machine on while holding the buttons
- Release when you hear a beep
- The display should show “rES”
This resets all settings to factory defaults.
What does the CL error indicate on my Midea washing machine, and how can I fix it?
The CL error means “Child Lock” is active. To fix it:
- Press and hold the “Temp” button for 3 seconds
- Wait for the CL symbol to disappear
- The controls should now work
This feature prevents kids from changing settings during a wash cycle.
How can I unlock the child lock on my Midea washing machine?
To unlock the child lock:
- Find the child lock button (often marked with a key symbol)
- Press and hold for 3-5 seconds
- Listen for a beep or watch for the lock symbol to disappear
The controls should now be usable.
What should I do if my Midea washing machine displays error codes?
For error codes:
- Check the user manual for code meanings
- Try a simple reset by unplugging for 1 minute
- Clean filters and check for blockages
- If the error persists call a technician
Many codes relate to water inlet or drain issues.
How can I manually reset programs on my Midea washing machine?
To manually reset a program:
- Press the “Power” button to turn off the machine
- Wait 30 seconds
- Turn it back on
- Select your desired program
This clears the current cycle and lets you start fresh.
