Pairing your Plantronics Voyager Legend Bluetooth headset is a straightforward process. To pair the PLT_Legend, activate pairing mode by tapping the Voice button and saying “Pair mode” or holding the Call button until you hear “Pairing”. This initiates the connection sequence, allowing your phone to detect the headset.
Once in pairing mode, enable Bluetooth on your phone and search for new devices. Look for “PLT_Legend” in the list of available devices and select it. Some phones may ask for a passcode – if prompted, enter “0000” or accept the connection request.
The Voyager Legend supports multipoint technology, letting you connect to two Bluetooth devices simultaneously. This feature enhances versatility, allowing seamless switching between your work and personal phones without re-pairing.
| Feature | Description |
|---|---|
| Pairing Method | Voice command or button press |
| Device Name | PLT_Legend |
| Passcode | 0000 (if required) |
| Multipoint | Supports two device connections |
Preparing Your Plantronics Voyager Legend for Pairing
Before pairing your Voyager Legend, you need to ensure it’s charged, in pairing mode, and ready to connect. These steps will help you prepare your headset for a smooth pairing process.
Charging Your Headset
A fully charged Voyager Legend is essential for optimal performance. To charge your headset:
- Connect the magnetic charging cable to the headset’s charging port.
- Plug the USB end into a power source (wall adapter or computer).
The LED indicator will glow red while charging. It turns blue when fully charged. A complete charge takes about 90 minutes and provides up to 7 hours of talk time.
| Charge Time | Talk Time |
|---|---|
| 90 minutes | 7 hours |
| 30 minutes | 2 hours |
For quick use, a 30-minute charge gives you about 2 hours of talk time.
Activating Pairing Mode
To pair your Voyager Legend, follow these steps:
- Turn on the headset by sliding the power switch to the ‘on’ position.
- Press and hold the Call button until you hear “Pairing”.
- The LED will flash red and blue, indicating pairing mode.
Alternatively, you can use voice commands:
- Tap the Voice button.
- Say “Pair mode” when prompted.
Your headset will stay in pairing mode for 10 minutes or until a successful connection is made.
Resetting the Headset
If you experience issues, resetting your Voyager Legend can often help:
- Press and hold the Call button for 15 seconds.
- Release when the LED flashes red then blue.
- The headset will power off.
After resetting, turn the headset on and try pairing again. This process clears all paired devices from the headset’s memory.
Remember to keep your headset’s firmware updated for the best performance and compatibility with your devices.
Executing the Pairing Process
The Plantronics Voyager Legend offers simple pairing options for phones, tablets, and computers. Follow these steps to connect your device quickly and start using your headset.
Pairing with a Bluetooth Phone
To pair your Voyager Legend with a phone:
-
Turn on the headset.
-
- Tapping the Voice button and saying “Pair mode”
- Pressing the Call button until you hear “Pairing”
-
Enable Bluetooth on your phone.
-
Select “PLT_Legend” from the list of devices.
-
Enter “0000” if prompted for a passcode.
The LEDs will stop flashing once paired. You’ll hear “pairing successful” when done.
Pairing with Another Phone or Tablet
The process for pairing with a second phone or tablet is similar:
- Slide the power switch to turn on the headset.
- Put the headset in pairing mode.
- On your new device, turn on Bluetooth and search for devices.
- Choose “PLT_Legend” from the available options.
- Accept the connection or enter “0000” if asked.
Your Voyager Legend can remember up to 8 devices. This allows easy switching between your work and personal phones.
Connecting to a Computer
To use your Voyager Legend with a computer:
- Ensure your computer has Bluetooth capability.
- Turn on the headset and enable pairing mode.
- Open your computer’s Bluetooth settings.
- Click “Add Bluetooth or other device”.
- Select “PLT_Legend” from the list.
- Follow any on-screen prompts to complete pairing.
For best results, use the Plantronics software for additional features and updates.
| Device Type | Pairing Steps | Max Devices |
|---|---|---|
| Phone | 5 | 8 |
| Tablet | 5 | 8 |
| Computer | 6 | Varies |
Remember to keep your headset charged for optimal performance during pairing and use.
Maximizing Headset Features
The Plantronics Voyager Legend offers several features to enhance your user experience. These include voice commands for hands-free control, comfortable eartips for extended wear, and intuitive call management functions.
Using Voice Commands
Voice commands allow you to control your headset without pressing buttons. To activate voice control, tap the Voice button on your Voyager Legend. You can then issue commands like “pair mode” to initiate pairing or “check battery” to hear your battery level.
Common voice commands include:
- “Answer” or “Ignore” for incoming calls
- “Redial” to call the last number
- “Call back” to return the last incoming call
Voice commands work best in quiet environments. Speak clearly and pause briefly after tapping the Voice button for optimal recognition.
Optimizing Eartip Comfort
Proper eartip fit is crucial for comfort and sound quality. The Voyager Legend comes with multiple eartip sizes. Try each to find the best fit.
To change eartips:
- Gently pull the current eartip off
- Push the new eartip onto the earpiece
- Twist slightly to lock in place
A well-fitted eartip should:
- Feel secure without pressure
- Block outside noise
- Allow clear audio
If you experience discomfort, try a different size or material. Silicone tips offer durability while foam tips can provide a custom fit.
Managing Call Functions
The Voyager Legend simplifies call management with its intuitive controls. The main call button handles most functions:
- Single tap to answer or end calls
- Double tap to redial
- Press and hold to activate voice dialing
| Function | Action |
|---|---|
| Mute | Tap mute button |
| Adjust volume | Press volume up/down |
| Check battery | Tap call button when idle |
To switch an active call between your headset and phone, press the call button for 2 seconds. This feature allows seamless transitions when privacy is needed.
Remember to check your user manual for detailed instructions on advanced features like managing multiple calls or using smart sensors.
Frequently Asked Questions
Connecting your Plantronics headset to different devices requires specific steps. Here are answers to common pairing questions for various scenarios.
How do I connect my Plantronics headset to an iPhone?
To pair your Plantronics headset with an iPhone:
- Turn on your headset and activate pairing mode.
- On your iPhone, go to Settings > Bluetooth.
- Tap on your Plantronics device when it appears.
Your headset should now connect to your iPhone.
What are the steps to pair a Plantronics Voyager Legend to an Android device?
Pairing a Plantronics Voyager Legend to an Android device is straightforward:
- Slide the power switch to turn on the headset.
- Say “Pair mode” or hold the Call button until you hear “Pairing.”
- Open Bluetooth settings on your Android phone.
- Select “PLT_Legend” from the list of available devices.
Can you guide me through connecting my Plantronics headset to a computer?
To connect your Plantronics headset to a computer:
- Ensure your computer has Bluetooth capability.
- Put your headset in pairing mode.
- Open Bluetooth settings on your computer.
- Click “Add Bluetooth or other device.”
- Select your Plantronics headset from the list.
Follow any additional prompts to complete the connection.
What is the process for pairing a Plantronics Legend headset to a laptop?
Pairing a Plantronics Legend to a laptop involves:
- Turn on the headset and activate pairing mode.
- Open Bluetooth settings on your laptop.
- Click “Add Bluetooth device.”
- Select your Plantronics Legend from the list.
- Follow on-screen instructions to finish pairing.
How do I reset a Plantronics Legend Bluetooth headset?
To reset your Plantronics Legend:
- Turn off the headset.
- Press and hold the Call button for 10 seconds.
- Release when you hear “Welcome” or see the LED flash red/blue.
This process clears all paired devices.
What should I do if my Plantronics Voyager Legend will not pair with my PC?
If your Plantronics Voyager Legend won’t pair with your PC:
- Ensure the headset is in pairing mode.
- Check if your PC’s Bluetooth is on and discoverable.
- Remove the headset from your PC’s Bluetooth devices and try pairing again.
- Update your PC’s Bluetooth drivers if issues persist.
Consider resetting the headset if problems continue.
| Issue | Solution |
|---|---|
| Won’t enter pairing mode | Hold Call button until LED flashes |
| Not visible to PC | Ensure PC Bluetooth is on and scanning |
| Fails to connect | Remove device and re-pair |
| Persistent problems | Update Bluetooth drivers or reset headset |
